Goto The ProMash Home Page
 
ProMash Message Board
Register  |   |   |  Latest Topics
 
 
 


Reply
  Author   Comment  
WC87

Registered:
Posts: 3
Reply with quote  #1 

Palmer's book makes some recommendations to add half of your malt extract after the boil is completed, if you are not doing a full 5 gal boil.  I've never done this - are there any pros/cons?  Palmer says this will help in keeping the extract from darkening, the so-called Maillard Reaction.

 

Thoughts?

 

 

JDonovan

Avatar / Picture

Registered:
Posts: 531
Reply with quote  #2 

Yes if you are doing small size, concentrated boils then adding the extract late will prvent scorching and mailard reactions. As to how much this greatly depends on the equipment you use, the heat source (IE gas vs. electric) and your technique.

 

Im not sure Palmer mentions it, but my opinion on the technique is that it is best to add the late extract to the wort immediately when you turn the flame off....stir it in and keep it hot for a good 10 minutes before diluting with water. This will insure that any nasties the extract may contain are killed from being in contact with 180+ degree wort for a few minutes. Dilute with water afterwards.

 

- Jeff


__________________
Beer Engineer
WC87

Registered:
Posts: 3
Reply with quote  #3 

Thanks for the response.  I appreciate the advice.

 

 

Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!